Sony LBT-D570 - Manual (Page 18)

-* continued
8
7
5
6
4
Tracks in the Desired Order (program
play)", program the tracks you want to
record for side A.
Make sure to program the tracks so that
the total playing time of the side A does
not exceed the tape length of one side.
2
Press DD on the remote to pause
recording at the end of the side A.
"P" appears in the display.
The total playing time "0.00" is
displayed.
3
Program the tracks you want to record
for side B in the same way as you did
for side A.
4
Press = EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward..
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
5
Select dual or single-sided recording.
To record Press DIRECTION
to select
One side of the tape —
Both sides* c::r3 or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6
When you want to reduce the hiss noise
in low-level high-frequency signals.
Press DOLBY NR so that "DOLBY NR
B" appears in the display.
7
Press CD SYNCHRO.
The REC and DD (pause) lamps light up
and deck B stands by for recording.
The C> lamp lights up and the <1 lamp
flashes for a few seconds, then
disappears.
r
pause mode
If you want to start recording from the
reverse side, press <1 so that the O
indicator lights steadily.
8
Press DD on the tape player to release
recording pause.
Recording starts.
After about 10 seconds, the CD player
starts playing.
To stop recording
Press □ on the tape player.
To check the order
Press CHECK repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel program edit
Press CONTINUE.
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE n (CrCb) tape.
SYSTEM
POWER-» ON
o
ni I I I r S —I c=^
1
Press = EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side oh
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press TUNER/BAND several times
until the desired radio band appears.
3
Tune in the radio station you want to
record. (See "Listening to the Radio", or
"Playing Preset Radio Stations" for
details.)
4
Select dual or single-sided recording.
To record Press DIRECTION
to select
One side of the tape
Both sides* CZ33 or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
When you want to reduce the hiss noise
in low-level high-frequency signals.
Press DOLBY NR so that "DOLBY NR
B" appears in the display.
6
Press REC.
The REC and D D (pause) lamps light up
and deck B stands by for recording.
The C> lamp lights and the <3 lamp
flashes for a few seconds, then
disappears.
r N
__
pause mode
If you want to start recording from the
reverse side, press <l so that the <3
indicator lights steadily.
7
Press DD on the tape player to release
recording pause. . _
Recording starts.
To stop recording
Press □ on the tape player.
To reduce noise during AM recording
If a whistling noise is heard while
recording, reorient the AM loop antenna for
optimum reception.
^ 0 I Chapter 4: the Tape Player