Sony SLV-750HF - Manual (Page 15)

VCR Setup
1
Set the RF UNIT on the VCR’s rear panel to
CH3orCH4.
If you made A/V connections, skip this step.
Set to whichever channel is not used in your area,
if both are used, pick either channel.
Details ate on page S5.
2 Set NORMAL/CATV to NORM.
Press MENU. Select TUNER PRESET.
NCNU NeNU
► TiNCk SCt/CHUX TIMCk $CT/CHCCK
$CT UP NCNU S(T UP NtNU
TUtKk
-
u^Tunek pRtscT
$CT VCk Plus* CHANIICIS $cr VCP Plus* CHANNELS
CA»ie 90X COMTROl w CAOLE eoi CONtkOL
CLOCK $(T CLOCK SET
Set to NORM.
TUNtk PRESET mtm
► NORNAL/CATV
AUTO PRESET
•NORM CATV
MANUAL SET •ADO ERASE
AFf
FINE TUNING •ON OFF
Details are on pages 19 and 20.
3 Preprogram the channels into the VCR.
Press MENU. Select TUNER PRESET.
MENU MENU
► TIMER SET/CHECK TIMER SET/CHECK
SET UP MENU SET UP MENU
TUNER PRESET ► TUNER PRESET
SET VCR Plus* CHANNELS SET VCR Plus* CHANNELS
carle rox control CARLE ROX CONTROL
CLOCK SET CLOCK SET
Select AUTO PRESET,
then press EXECUTE.
TUNER PRESET
NORMAL/CATV
► AUTO PRESET
•NORM CATV
MANUAL SET •ADD ERASE
AFT
FINE TUNING •ON OFF
Details are on pages 19 and 20.
VCR Plus+ Channel Setup
1 Find the VCR Plus4- Channel Listing in your program
guide. For details, see page 42.
2 If the channels in the program guide are different from
the channels that you actually use on your TV, set the
channels that are different as follows;
?
01
a
3
5*
<a
3
Press MENU.
Select SET VCR PIUS+
CHANNELS.
MENU MENU
► TIMER SET/CHECK TIMER SET/CHECK
SET UP MENU SET UP MENU
TUNER PRESET TUNER PRESET
SET VCR Plus* CHANNELS ► SET VCR Plus* CHANNELS
CARLE ROX CONTROL CARLE ROX CONTROL
CLOCK SET CLOCK SET
Set the appropriate guide
channels and TV channels
lor your area.
Program listing guide channei-----------
Details are on page 43.
VCR P>us* channel list
>GUtOE TV GUIDE TV ------
2 • 73 SO • 47
S • 4 RR * 90
17 • $$
2R • 0
43 -UR
Push MENU So Quit
Your actual TV channel -
To Watch the TV
1 Turn your VCR off, or press the VCR’s TV/VTR button
until the VTR indicator in the display window goes off.
2 Tune the TV normally.
To Watch the VCR
1 Tune the TV to CH 3 or CH 4, whichever you set on the
back of the VCR. (If you made the A/V connections on
page 7, set your TV to the A/V input instead.)
2 Insert a cassette and press ► PLAY. If there’s no
picture on your TV, press the VCR’s TV/VTR button until
the VTR indicator comes on in the VCR’s display
window.
Details are on page 28.
To Record A Program
1 Press VCR Plus+ on the Remote Commander.
2 Enter the program’s PlusCode number.
3 Press ONCE. DAILY, or WEEKLY on the Remote
Commander.
4 Insert a blank casette.
5 Press TIMER REC on the Remote Commander.
Details are on page 44.
Preparation 15