Introducing vcr plus – Sony SLV-750HF User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Introducing VCR Plus+
Recording Programs Using VCR Plus+
To use VCR Plus+ to record programs, all you need is the
program’s PlusCode, which you’ll find in the program listings
in your local newspaper, cable TV guide, or
TV Guide
magazine.
For example, to record the following program, just use the
following procedures:
PlusCode
EXAMPLE: IB MOVIE—Comedy f2hrs.tl53292l
NOTE:
• You can set the program without opening the VCR
Plus-f menu. Refer to the display window on the VCR.
•
When you use a cable box, use Hookup 2 and set the
CABLE BOX CONTROL (See -Setting the Cable Box
Control* on page 23). Turn the cable box on.
Press VCR Plus-f.
VCR P)us+
The VCR Plus-f TIMER SET
PlusCode TAPE SPEED
menu appears.
[..........................] tSP]
Enter 53292 (the program’s
PlusCode) In the PlusCode
field.
If you make a mistake, press
TIMER CLEAR and enter the
PlusCode again.
VCR Plus*
PlusCod«
TAPE SPEED
tS3292--]
CSPJ
Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
See the following chart for details of these options.
ONCE:
Records scheduled programs one time only.
WEEKLY:
Records every week at the same scheduled
time.
DAILY M-F: Records Monday to Friday at the same
scheduled time
The VCR Plus+ menu
displays the recording
information: date, program
start and stop times, channel
number, and tape speed.
If you make a mistake, press
TIMER CLEAR, and start from the beginning.
VCR Plus-»
PlusCode
TAPE SPEED
I53?92---]
ISP)
RECOROtNS TIHE
DATE START
STOP
CH
:J/25»0I 6:00"
;i:30 "
52
i>
To select the cassette's
recording speed (SP or EP),
press TAPE SPEED.
Unless you change the
cassette speed, SP is used.
See -Maximum recordirrg time
of a cassette* on page 27 for
information about cassette speeds
VCR Plus-)-
PlusCode
TAPE SPEED
[53292---)
ISP)
If you want to set another program, repeat steps
1 to 4.
6 Insert a cassette into your VCR.
Press TIMER REC (ON/OFF) to set the VCR’s
recording timer.
The VCR enters the timer recording standby mode.
Your VCR is now set up to record the programs you’ve
selected. The VCR will turn on automatically, record the
program, and then turn off until the next programmed
show is ready for broadcast.
For checking, changing, and cancelling the settings, see
pages 39 and 40.
Leave the cable box on.
44
Basic Operations