Sony SLV-750HF - Manual (Page 20)

Presetting the Active Channels
Press 4 or ► to select
NORM or CATV.
NORM presets the VHP and
UHF channels; CATV presets
your cable TV channels. The
lowest channel number, 2 for
NORM and 1 for CATV, will
appear on the screen.
TUNER PRESET wm
NNORMAl/CATveNORH CATV
AUTO PRESET
MANUAL SET eAOO
ERASE
AFT SON OFF
FtNE TUNING
Press EXECUTE
Receivable channels are preset in numerical
sequence. When no more channels can be found, the
presetting stops and the picture of the lowest
numbered channel is displayed on the tape counter.
The message 'Please wait" is flashing while presetting
on the TV screen.
PressAor vto move the
cursor to AUTO PRESET.
TUNER PRESET
NORMAl/CATVSNORM CATV
PAUTO PRESET
MANUAL SET #A00 ERASE
AFT eoN OFF
FtNE TUNING
NOTE:
The VCR automatically exits from the TUNER PRESET
menu if you don't proceed for more than one minute.
1 1 1 ___________________________________________________________________________ 1
Presetting Desired Channels or Disabling Unwanted Channels
After automatic presetting, you can disable and/or add channels.
1------------------------------------------------------------------------------ 1
1 ----------------------------------------------------------------------------- 1
Use * and w to move the cursor.
Use < and >■ to select the items.
'<S> '<D I
© I
árá»
1 Follow steps 1 to 3 in “Presetting All Receivable
Channels Automatically” on page 19.
2 To disable channels, press CH -t/- to select the
channel.
To add channels, press channel number buttons (0 to
9) and ENTER key to select the channel.
3 To disable channels, press ^ or to select ERASE.
To add channels, press ^ or ^ to select ADD.
4 Press EXECUTE.
When you press CH +/-, the disabled channels are
removed and the added channels are displayed.
20 Preparation