General setup information, Why this setting is necessary, 2 press power – Sony SLV-750HF User Manual
Page 55: 3 press tv/vtr, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
General Setup Information
Setting the RF UNIT
Why this setting is necessary:
You must set the RF UNIT selector at the rear of the VCR
properly so that your TV can receive the correct signal from
the VCR. Set the selector to CH 3 (channel 3) or
CH 4 (channel 4), whichever is not active in your area.
If you connect a TV or color monitor equipped with A/V input
jacks, skip this step.
1
Set the RF UNIT at the rear of the VCR to CH 3 or
CH 4, whichever is not active in your area.
2
Press POWER.
The power indicator lights up on the VCR.
3
Press TV/VTR.
The VTR indicator lights up in the display window.
4
Select an active channel in your area by pressing
CHANNEL 4/-.
5
Turn on your TV and set it to the channel you selected
in step 1.
Your TV is now tuned to the VCR. Whenever you use the
VCR, set the TV to the preselected channel.
NOTE:
For details on adjusting TV channels, see your TV
instruction manual.
a
<D
3
3
3
CO
3
3
Additional Information
55