Editing – Sony SLV-750HF User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing
Using an additional VCR, you can record programs from one VCR to the other. Here’s how:
Editing from Another VCR
Here’s how to edit from another VCR (such as an 8mm video
camera recorder for playback) when using this VCR for
recording.
UNE IN 2
VIDEO
LINE IN 2
AUDIO
NORMAL-
NOISE REDUCTION-
EDIT-
i
Audio/video connecting cable (supplied)
VIDEO
OUT
AUDIO
OUT
pleryback VCR (Camcorder)
Before you start:
• Select LINE 1 or LINE 2 with INPUT SELECT, whichever
the playback VCR is connected to.
• Select SP or EP with TAPE SPEED.
• Select the EDIT picture on the PICTURE switch.
NOTE:
If your playback VCR has an editing function, select it to
reduce static and improve reception.
How to edit:
1
Insert a blank cassette into the recording VCR with a
safety tab in place.
2
Turn on the playback VCR and insert a source
cassette.
3
Locate the playback start point and select the
playback pause mode on the playback VCR.
4
Locate the recording start point and select the
recording pause mode on the recording VCR.
5
Press II PAUSE on both VCRs.
For best results, press II PAUSE on the playback VCR
just before pressing II PAUSE on the recording VCR.
When you’ve finished editing, press ■ STOP on both
VCRs.
When you release the recording pause mode, the APC
function may not operate.
For details, see page 51.
NOTES:
• If your playback VCR is a stereo unit, make
connections with the supplied audio/video connecting
cable.
• If your playback VCR is a monaural unit, connect the
white piug to LINE IN 2 AUDIO L on this VCR. This
lets you record the sound of the playback VCR on
both channels of this VCR. Do not connect the white
plug to LINE IN 2 AUDIO R.
• When connecting the VCRs, do not connect both
LINE IN and LINE OUT jacks on your VCRs
simultaneously. Doing so may cause a humming
noise.
• Tapes recorded using the APC function are played
back normally on VCRs that do not have the APC
function.
• If you have the PICTURE switch on the VCR set to
EDIT, the APC function does not operate when
playing back a tape but does operate when recording.
When you are editing tapes (dubbing) using this unit
as either the recording VCR or the playback VCR,
use the EDIT setting.
3
<D
CD
o
Advanced Operations
53