Paper specifications, Certification, Standard forms specifications – HP 2566C User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B
PAPER SPECIFICATIONS
Certification
This section describes the paper specifications which must be met to
ensure optimum performance of the HP2566C/HP2567C printer,
Hewlett-Packard conforms to ANSI standard X3.96-1983, “American
National Forms Information Systems for Continuous Business Forms,”
and ISO Recommendation No. 2784, which cover common form widths
and depths, standards for sprocket feed holes and margins, as well as
other basic tolerances.
All measurements should be made at 20° to 26° C (68° to 78° F) and
45% to 50% relative humidity.
The printer uses continuous fan-fold edge-perforated paper varying in
width from 3 inches (7.6 mm) to 18 inches (45.72 cm). Although the
printer accepts paper as wide as 18 inches, the farthest right it can print
is 15.2 inches (38.6 cm).
Standard Forms
Specifications
Paper Sizes
Maximum
Minimum
Maximum
Maximum
Maximum
Maximum
Minimum
form width:
form width:
left margin:
right margin:
printing width:
form length:
form length:
18 inches (45.72 cm) edge-to-edge
3 inches (7.62 cm) edge-to-edge
2 inches (5.08 cm)
2.8 inches (7.11 cm)
13.2 inches (33.53 cm)
16 inches (40.64 cm)
2 inches (5.08 cm)
PAPER SPECIFICATIONS B-1