HP 2566C - Manual (Page 16)

2
GETTING THE MOST FROM YOUR PRINTER AND PAPER
Printer Location
Note
The HP2566C/HP2567C printer should be located in a clean, traffic-free
environment, preferably an area not subjected to excessive mechanical
shocks, vibrations or Avide ranges of temperature. Air conditioning is
not required to ensure reliable operation of the printer; however, the
environmental specifications as outlined in Appendix A should not be
exceeded.
Make sure the printer sits level. The output paper stack will not stack
correctly if the printer does not sit evenly on the floor.
The location of your printer must provide adequate operator access to
both the front and rear of the printer. The area around the printer
should be kept clean and dust free so that the air used to cool the
printer will not contain excessive dust particles.
If the printer must be operated in either high or low humidity, read
Appendix B for ways to optimize paper handling.
Printer Installation Hewlett-Packard provides the original installation and testing of the
printer at your site. However, if you need to move the printer to a new
location, follow these procedures:
Moving the Printer l- Record printer configurations.
Before moving the printer, record key configuration values retained in
memory. This will allow quick restoration in the event of a batteiy
failure. Recording all configuration settings listed in Table 5-1 is
recommended, however configuration functions 20-29 are the most
critical. These could affect system performance and stability and must
be verified before connecting the printer to the operating system.
Refer to Chapter 5, “Configuring Printer Features” for information
on configuration settings. To find out which printer configuration
parameters are saved in memory when power is turned off, refer to
“Power-On Parameters and Power-Fail Recoveiy” on page 6-11.
GETTING THE MOST FROM YOUR PRINTER AND PAPER 2-1