HP 2566C User Manual
Page 109
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Paper Weights
Single part:
15 - 100 pound (57 - 380 gm/sq meter)
Multipart:
Papen 12 pound (46 gm/sq. meter) up to 6 total pages
Carbons: 8 pound (30 gm/sq. meter) up to 6 total pages
Pack Thickness: Maximum .024 inches (.61 mm) total
Caihonless Multi-Part: Up to 4 part forms
Due to variations in the manufacturing processes, quality and
composition of paper, Hewlett-Packard cannot guarantee satisfactory
performance with all papers and forms. Special paper, including
multi-part forms, carbonless forms, card stock, and labels should be
tested for satisfactory feeding, registration and print qualify prior to
purchase. The forms used in the printer should not vary in thickness
across the printable surface. If paper is to be used in humidity extremes
(greater than 80% or less than 20%) it should first be tested. Paper to
be used at high humidity should be thoroughly tested for satisfactory
feeding and handling. Paper to be used at low humidity should be tested
to determine if static buildup must be eliminated for proper stacking.
B-2 PAPER SPECIFICATIONS