Button to – HP 2566C User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unloading the Paper
Stack
When you run out of paper in the printen
1. Advance paper into the stacker.
Put the printer “off-line” and press
[
form
feed
1 to advance the last
sheets of paper into the stacker.
2. Remove the stack.
Slide the paper tray out and pick up the stack.
3. Close the stacker.
Push the tray back in and close the door.
When you Hnish one job and want to start anothen
1. Put the printer "off-line."
Push the
fON
line
)
button to
take
the printer “off-line.”
2. Pull out the paper tray.
3. Remove your job.
Tear off the last sheet from your job and remove it from the paper
tray.
4. Prepare the stacker for the next job.
Adjust the backstop and door chains for your next forms length.
5. Push the paper tray back in.
6. Push the
[
on
line
)
key to put the printer turn the printer "ON."
7. Start your new job.
Return to the stacker and make sure the forms are folding and
stacking correctly.
8. Close the stacker door.
USING THE POWERED PAPER STACKER 4-7