HP 2566C User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Print Quality Is Erratic, Very Light, or Smudged
L Check the Forms Thickness Adjustment (page 3-21).
r Replace the ribbon (page 3-5).
» Make sure the ribbon is installed correctly behind the paper shield
(page 3-5).
■ Check vertical paper tension (page 3-15).
The Printer Will Not Print
■ Check the interface configuration to make sure it is configured
correctly. Refer to your Interface manual for information.
■ Make sure the printer is “on-line.”
« Check the interface cable for proper connections.
“ Check system status and spoolers (if applicable).
Status Code 2
Status Code 2 displays after a paper jam is cleared or power is restored
following a power failure. The printer is recovering your print job and
readying itself to print at the point where the error occurred. DO NOT
DISTURB THE JOB OR PRINTER! This process may take several
minutes, depending on the size of the job and the current capacity of the
computer. (This condition is only true when using an HP-IB interface on
some systems.)
IN CASE OF DIFFICULTY 7-3