HP 2566C User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Place spool on retainer cups.
Open the swing-gate completely until it latches at the top. Lower the
ribbon shield and open the ribbon access cover (refer to Figure 3-4,
B). Put on the plastic gloves supplied in the ribbon box and place one
of the ribbon spools on the retainer cups as shown in Figure 3-8.
Lowering Ribbon Shield and Opening Ribbon Access Cover
3-6 PREPARING THE PRINTER FOR OPERATION
Advertising
This manual is related to the following products: