Loading of penlight batteries, Adjustment of eyepiece – Canon AUTO ZOOM 1218 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading of Penlight Batteries
Load five 1.5 v penlight (size AA) batteries for film drive and power
zoom.
1
Remove the lower battery chamber cover. Insert the two pen-
*
light
batteries
according
to
the
insertion
diagram,
and
screw
the cover back on.
0 Loosen the knob for the upper battery chamber by turning it
^ to the left. Remove
the top cover by sliding it backwards.
Insert
three
penlight
batteries
with
the
+
poles
facing
towards
the front according to the diagram inside the chamber.
Adjustment of Eyepiece
Adjust the eyepiece before putting on the top cover.
1
Aim the camera in the direction of a bright subject and then
'
look into the viewfinder.
O
Turn the eyepiece adjustment ring and adjust it so that the
^ f/stop scale can be clearly seen. The eyepiece is now adjusted
to your eyesight.
Q Slide the top cover back on and then tighten the knob for the
” upper battery chamber by turning it to the right.