Unloading of film cartridge, Proper care of the camera – Canon AUTO ZOOM 1218 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unloading of Film Cartridge
1
stop shooting when the footage counter reaches “ F ”, and take
* out the film cartridge.
O Send the film cartridge to an authorized processor. It will be
^ returned to you wound on a reel so that immediate projection
is possible.
Proper Care of the Camera
1
Do not put fingerprints and other stains on the zoom lens.
‘
Wipe gently with silicon cloth when removing stains and use
a blower for removing dust.
O
It is important that
the aperture section, through which the
^ film passes, always be kept clean by blowing the dust away
with a blower. Do not use anything hard, such as a metal brush.
3
Before putting the camera into its case, turn the shutter lock
dial to ” L”.
4 Keep the camera away from moisture, heat and dust. Do not
” keep naphthalene or camphor near the camera.
C When the camera is not to be used for a prolonged period of
** time, remove both the mercury and penlight batteries and keep
them in a dry place.