Setting of the aperture control ring, Setting of the filming speed selector, Holding the camera – Canon AUTO ZOOM 1218 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting of the Aperture Control Ring
For the electric eye operation, set the aperture control ring at
"AUTO”.
#
The electric eye wili function only when the ring is set at the
click-stop position of "AUTO”.
# Refer to page 18 for other uses of the aperture control ring.
Setting of the Filming Speed Selector
1
Set the filming speed selector at "18” for shooting at the
‘
normal speed of 18fps.
O
Set the selector at "SLOW MOTION” for shooting at a high speed
^
of
approximately
45fps.
"SLOW
MOTION”
is
very
effective
when
analyzing
movements
or
for
prevention
of
blurring
during
panning.
4 Be sure to shift the filming speed selector when not pulling the
trigger.
Holding the Camera
1
Hold the trigger grip with the right hand and place the fore-
'
finger on the trigger. The right elbow should be firmly pressed
against the body. Focusing, zooming and manual aperture control
are performed with the left hand.
2
For best results, use a tripod or the Canon Chestpod, especially
when shooting in telephoto or when zooming.