Zooming, Power zooming, Manual zooming – Canon AUTO ZOOM 1218 User Manual
Page 28: Zoom range setting levers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Zooming
When you wish to zoom or want to compose your picture properly
in the viewfinder, turn the zoom lens by pressing the power zoom
switch or using the manual zoom lever. The image seen through
the
viewfinder
will
change
in
magnification
and
the
field-of-view
will also change.
When zooming is performed during shooting, any desired zooming
effect can be reproduced on the film.
Power Zooming
You
can
obtain
smooth
and
regulated
zoom
effects
by
power
zooming.
1
Set the zoom control dial according to your needs. If you wish
‘
to zoom in high speed, set the dial at “ H ". If you wish to
zoom in low speed, set the dial at “ L”. The necessary zooming
times for the entire range are 3-6 and 10-12 seconds in “ H ” and
“ L" respectively.
2
Press the power zoom switch. Zooming towards telephoto is
obtained by pressing "T” and towards wide-angle by pressing
“ W”.
# Do not turn the zoom lens manually while the zoom control dial
is set at ‘‘ H ” or “ L".
Manual Zooming
When you wish to zoom faster or slower than at regular speed,
rotate the zoom lens manually.
■j Set the zoom control dial at "MANUAL”.
2
Turn the zoom lens by using the manual zoom lever.
Zoom Range Setting Levers
You can fix the zoom range by shifting the zoom range setting
levers at any two focal points within the entire range. Zooming
will not be performed beyond the fixed range.