Canon EOS D30 - Manual (Page 134)

REFERENCE
Exposure Warnings
Mode Blinking warning Description Remarks
P
/ 1 \ \ \ ^
Subject is too dark. Use flash.
V
\ \ 1 / / .
-N odo ~
^ / / 1 \ \ ^
Subject is too bright. Use a neutral density filter.
Tv
5DD ”15 -
1
Picture will be underexposed. Turn the dial to a
slower shutter speed.
BO ^гг -
' f 1
Picture will be overexposed. Turn the (¿a) dial to a
faster shutter speed.
Av
' /1
Picture will be underexposed. Turn the (¿a) dial to a
smaller aperture value.
. \ ,
7^000^.5
Picture will be overexposed. Turn the (¿a) dial to a
larger aperture value.
A-DEP
' /1 \ '
The desired depth of field
cannot be obtained.
1) Move farther from the
subject and try again.
2) If using a zoom lens, use
the shortest focal length.
V
\ ^ ^ ^ /
-30" 15,-
'' / / 1 \ \ ^
Subject is too dark. Use a flash (the result will
be the same as using
Program AE { P ».
V N ' 1 / / /
-N odo
^ / / 1 \ \ ^
Subject is too bright. Use a neutral density filter.
1
The warnings shown are examples using a lens with a minimum aperture value of
f/3.5, and a maximum aperture value of f/22. Aotual maximum and minimum
aperture values will depend on the particular lens you use.
AE Lock Effects for Combinations of Focusing
Point Seiection and Metering Method
(when using a mode in the Creative zone)
\ Focusing point selection
Metering method \
Auto selection AF Manual selection AF
Evaluative metering
AE lock applied to the
metered value at the active
focusing point.
AE lock applied to the
metered value at the
selected focusing point.
Partial metering AE lock applied to the metered value at the center focusing
point.
Center-weighted averaging
134