Fe lock, Flash exposure compensation, Modeling flash – Canon EOS D30 User Manual
Page 99: Press the camera’s depth-of-field preview button, Wireless multi-light/e-ttl autoflash photography
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Flash Photography with the EOS-Dedicated 550EX Speedlite
FE Lock
Taking FE Lock pictures with the 550EX Speedlite is the same as described in “FE Lock” (->-94)
for the built-in flash. In step 1, be sure the 550EX Speedlite pilot lamp is on.
The flash mode may be either normal flash or high-speed sync. The FE lock operates with
either mode.
@ Flash Exposure Compensation
For flash pictures with flash exposure compensation, see “Flash Exposure Compensation” for
the built-in flash. (^95)
Modeling Flash
Modeling flash allows you to see shadows, light balance, and other effects produced by multi
light settings.
Check
that
the
camera
and
Speedlite are properly set for flash
photography.
Press the camera’s depth-of-field
preview button.
The Speedlite fires at 70Hz for approximately
one second.
0)
</)
ZT
"D
zy
o
o
CQ
—1
Q>
■D
Wireless Multi-Light/E-TTL Autoflash
Photography
The 550EX Speedlite can be operated as a slave light from a master (550EX or ST-E2) for easy
wireless multi-light/E-TTL autoflash photography. The slave 550EX is placed to supplement the
master flash, which provides the primary flash for the subject.
3 This is a Type-A camera. For details, refer to the user’s guide for your Speedlite.
99