Replacing the backup battery – Canon EOS D30 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Replacing the Backup Battery

When the backup battery’s power level runs low, the message T bC” appears on the camera’s

LCD panel. If this happens, you will need to purchase a replacement CR2025 battery and

replace the backup battery in your camera as follows.

If you replace the backup battery while the camera is connected to a battery pack with power

remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.

Set the Main Switch to (OFF).

Open the backup battery chamber

cover by turning it 45 degrees
counterclockwise, as shown by the

arrow in the diagram.

Be careful not to rotate the cover more than

45 degrees.

Remove the old backup battery.

Turn the camera so the backup battery

chamber faces down, and press the edge

of the battery to remove it.

Insert a fresh backup battery.

Make sure the battery’s positive (+) side

faces up.

Close the cover by turning it

clockwise, as shown by the arrow in

the diagram.

If the date and time now displayed in the

LCD panel are incorrect, you will need to

set them. (^38)

O

The backup battery must be a CR2025 button-type lithium battery.

24

Advertising