Canon EOS D30 - Manual (Page 45)

Check the Image Immediately
MENU Checking the Image After it is Taken
You can set the cannera to display each image on the LCD monitor as soon as it is taken. You
can do this two ways; Select [On] to display the image by itself, or select [On (lnfo)](->104) to
display the image with its recording information. Select [Off] if you do not want to display the
image. The default setting is [On].
Print QfiSf
MiM zmr wf? 1 Pin.
..“■■“"1 2 isS.
irtsKpSE StrdE'-d
Off "
From the Menu, select [Review].
• Press the (MENU) button.
Turn the (O) dial to select [Review], then
press the <0) button.
Select the Review setting.
# Turn the
(O)
dial to select the desired
option, then press the (0) button.
’ The setting is entered, and the display
returns to the menu.
Press the (MENU) button to clear the
screen and exit the menu.
3'
~q_
CD
33
o'
c
“S
0
13’
CQ
[On] selected
Take the picture.
' After the picture is taken, the image as it
was shot appears on the LCD monitor.
The time that image is displayed depends
on the review time setting. (->-46)
The display differs depending on whether
you selected [On] or [On (Info)].
[On (Info)] selected (->104)
Histogram
(->•104)
Image
information
(^104)
Date/time
(^38)
li
You can change the review time setting. (->46)
45