Canon EOS D30 - Manual (Page 95)

Using the Built-in Flash
@ Flash Exposure Compensation
The EOS D30 camera can adjust the level of the built-in flash or any EX-series Speedlite. The
compensation amount can be up to ±2 stops in 1/2-stop increments. You cannot use flash
exposure compensation in the Easy Shooting zone.
Press the <^> button.
(06 )
4^^
-2.1.®.1.
Set the exposure compensation
amount.
■# Set the Quick Control Dial Switch to (ON).
® Look at the LCD panel as you turn the
(O) dial.
The [+] side indicates positive compensation,
and the [-] side indicates negative
compensation.
Negative ~ 2 , . 1 . ^ . 1 . 2 + Positive
compensation compensation
Once set, the exposure compensation
amount remains in memory after the Main
Switch is set to (OFF).
To cancel, set the compensation amount to
the (^) position.
Q)
W
O
f—t"
o
CQ
—i
Q)
■D
IT
'<
1
The flash Exposure compensation function also operates when you use an EX-series
Speedlite. If the camera and EX-series Speedlite are both set for exposure
compensation, the EX-series Speedlite setting has priority and the camera setting
does not function.
You can set the camera to adjust exposure compensation in 1/3-stop increments.
(C,Fn-4^124)
You can also disable the Auto reduction of fill flash function. (C.Fn-10^126)
95