Wl-50 wireless controller, Operation qo – Canon E 200 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WL-50 Wireless Controller
4fn
fRl
Using the wireless controller you can operate
the camera from a distance,
0
Transmitter
0
F. (Fade) START/STOP
Button
0
ON SCREEN
Button
0
FF
^ Button
0
PLAY
► Button
0
STILL ►M
Button
0
REC
# Button
0
STOP
■ Button
0
REW
^ Button
0
TAPE RETURN
Button
0
COUNTER RESET
Button
0
ZOOM
Buttons
0
START/STOP
Button
Operation QO
Aim wireless controller at camera remote
sensor
0
and press control buttons to operate
camera. Use wireless controller within 4 metres
of the camera. The tally lamp
0
lights up when
remote sensor receives a signal.
10
Notes:
•
When using wireless controller check that it lights up the tally lamp. If tally lamp lights, wireless
controller can be used from that position.
• If you are too close to camera when operating wireless controller, camera may not respond to wireless
controller’s signal.