F. always replace the lens cap, G. do not expose the camera to shock or vibrations, H. avoid sudden changes in temperature – Canon E 200 User Manual
Page 77: I. do not disassemble the camera
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F. Always Replace the Lens Cap.
Always replace the lens cap after use to
prevent sand and dust from getting on the
lens. Be especially careful to affix the cap on
windy days.
G. Do Not Expose the Camera to
Shock or Vibrations.
Be sure to handle the camera gently.
Vibration or shock can cause damage.
H. Avoid Sudden Changes in
Temperature.
If the camera is suddenly brought into a
warm place from a cold place, condensation
can form on the internal peirts and lens. So
take appropriate care when ntoving the
camera.
I. Do Not Disassemble the Camera.
ft is very dangerous to disassemble the
camera or touch any of its internal parts, as
you may risk electric shock or other ha
2
ards.
If the camera does not function property, take
it to qualified service personnel.
J. Using the Battery Pack and
Recommended Accessories.
Carefully read the instructions that come with
the battery pack before use. Arto to reduce
the risk of electric shock and to reduce
annoying interference, use the recommended
accessories only.
>
o
g
H
o
z
>
o
33
o
77