Canon E 200 - Manual (Page 28)

STOP
Video Cassette Notes
• Do not leave video cassette in camera after
use, especially when the camera will not be in
use for a long time.
• There are several holes on the video cassette
back, which are used for transferring
information. Do not cover them with adhesive
tape or other materials.
• Do not use video cassettes with damaged or
spliced tape or ones that do not meet
standards.
• To protect your video ceissette put it in the
plastic case, after use. Do not store video
cassettes where they may be exposed to high
temperatures, high humidity, direct sunlight,
magnetic fields, dust or mould.
Video cassette erasure prevention
switch
To prevent accidental erasure of recorded
material, slide switch at bottom of video
cassette as shown. If switch is returned to its
original position, recording is possible once
again.
Refer to video cassette instmction manual for
more information about erasure prevention.
• When you load a video cassette that is set for
erasure prevention, the camcorder will be____________
placed in playback mode automatically, riaa
Use another video cassette or set switch to
enable recording.
To save: Erasure Prevention
To record: Recording Possible
28