Canon VI-T User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
r
1. To disassemble the magazine, place
your finger on the Button and turn
the Inner Shell clockwise until both
the Inner and Outer Shell Slots are
superimposed and the Safety Lock
disengaged. Draw out the Inner Shell.
2. Insert the tapered end of the film
into the slit of the Center Spool.
Face the emulsion (dull) side towards
the spindle of the spool.
3. Wind
5}i
feet of film around the
Center Spool moderately tight for
36 exposures, 3Ji ft. for 20 exposures.
Advertising
This manual is related to the following products: