Capresso Impressa J5 - Manual (Page 16)

• For the hot water button you can override the water volume.
• For the steam button you can override the steam duration.
Important:
• You always override the coffee strength, before you push one
of the single-cup buttons.
• Coffee and Hot Water volume as well as steam duration you
override after you push any of the beverage buttons.
Example:
Your 1-cup espresso button is programmed to
STRONG 1.5 oz.
Somebody wants a MILD 2oz. espresso.
READY
• Place a cup underneath the dual coffee spouts.
• Turn the Rotary Dial. The display shows four different strength
settings MILD , NORMAL , STRONG, XSTRONG.
• Select MILD then push the 1-Espresso button. 1 ESPRESSO .
MILD .
• While the J5 is grinding, turn the dial again. This time it will
show the coffee volume. Select 2.0 OZ . The J5 will produce a
2.0 oz mild espresso and will stop automatically. READY .
The next time you push the 1 cup espresso button it will
produce the programmed setting (STRONG 1.5 oz.)
Please note: When you select a different strength you must
push one of the coffee buttons within the next 3 seconds,
otherwise the J5 reverts back to
READY .
Please note: When you push one of the double cup buttons and
you change the volume, the display will always show the volume
per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total
of 14 oz.
11.2 VISUAL PROGRAMMING OF CUP SIZE
Instead of overriding the volume or duration of the beverage
buttons you can re-program the cup size and the duration of the
steam by going into the programming functions (chapter 17.2) or
by visually programming the output.
Example: you want to make sure your personal espresso cup is
filled to the rim.
READY .
• Place the cup under the coffee spouts.
• Push and hold the 1-cup Espresso button until the display
shows ENOUGH COFFEE ? . The J5 starts grinding and
brewing espresso.
• Push the 1-cup Espresso button just before your cup is full and
the display shows OK , then 1 ESPRESSO . This is now the
new programmed volume for the 1-cup Espresso button.
This Push and Hold feature works for all four coffee buttons and
the steam and hot water button.
11.3 USING PRE-GROUND COFFEE (Fig. 11)
You can also use pre-ground coffee, bypassing the grinder. This
comes in handy if someone requests decaf coffee or a decaf
cappuccino. You can also use the pre-ground funnel for ground
flavored coffee.
IMPORTANT:
• Never fill the funnel with instant coffee.
• Do not fill the funnel with more than two scoops. The funnel is
not a coffee storage container.
• If coffee is ground too fine it might be processed very slowly or
the J5 will interrupt the process altogether.
16.