CDI Torque MULTITEST Motorized Loader - Manual (Page 16)

2-2
Functional Description and Specifications
A — Indicator
The 2000-810-01 Indicator monitors and displays the torque
applied.
B — Transducer (Accessory)
The loader accepts all MULTITEST series single transducers
directly. Use a 2000-500-02 adaptor kit to mount the optional
2000-400-02 4-in-1 transducer. For additional information refer
to Appendix A–Accessories.
C — Loader
Use the 2000-800-02 Motorized Loader for testing and
calibrating all torque wrenches, drivers, torque multipliers, non-
impact pneumatic and electric nut runners. It can also be
fixtured for testing and calibrating cable tensiometers and
compression or tension gauges. Loader components are:
• Indicator Stand
• Motor
• Safety Shield • Power Amplifier Box
• Hand Crank • Motorized Control Box
• Transducer Mounting
D — Motorized control box.
The MCB controls the motor to generate a torque which is
applied to a wrench while the Torque Tester measures the
resulting torque. When the target torque is reached, the MCB
will stop the motor.
E — Roll Cabinet
The roll cabinet features nine heavy duty drawers with ball
bearing slides, locking wheels and drawer locks. MULTITEST
accessories are stored in the roll cabinet which is fitted with
foam inserts for easy inventory control. The nine drawers are
assigned and arranged as shown in Figure 2-2 .
Figure 2-2: Roll Cabinet Drawer Layout