CDI Torque MULTITEST Motorized Loader - Manual (Page 19)

2-5
Functional Description and Specifications
G — Front Panel Membrane Function Keys
Toggles between TORQUE and FORCE measurement modes.
Selects TRACK, PEAK HOLD, POWER TOOL, FIRST PEAK
and ANGLE modes.
Selects following units on LCD display:
Torque units in: Nm, dNm, cNm, mkg, cmkg, lb ft, in lb, in oz,
or
Force units in: N, dN, kp, gf,lbf, oz
Manually resets ANGLE display on LCD at any time.
Manually resets ZERO TARE.
Selects LED or LCD digit to right (blinking) for setup and
programming. Shift for printer and angle encoder programming.
Selects LED or LCD digit to left (blinking) for setup and
programming. Shift for printer and angle encoder programming.
Terminates calibration and program modes. Returns to 4-in-1
transducer scan.
Increments selected digit during calibration and program modes.
Scrolls statistical analysis display.
Decrements selected digit during calibration and program
modes. Scrolls statistical analysis display.
NOTE: * Use Torque or Force measurement Mode with hand crank.
* Use Torque measurement mode only with Motorized Control Box.