CDI Torque MULTITEST Motorized Loader - Manual (Page 76)

6-4
2000-800-02 Motorized Loader
Use the 2000-800-02 Motorized Loader to test torque wrenches.
Refer to Figure 6-2 for an exploded view of the Loader and
components.
Figure 6-2: 2000-800-02 Motorized Loader, Exploded View
A — Drive Adaptor
A drive adaptor couples the wrench to the transducer. Low
torque MULTITEST series transducers use an internal-internal
drive adaptor and high torque MULTITEST transducers may use
an adaptor/reducer.
B — Transducer (Accessory)
The loader accepts all MULTITEST series single transducers
directly. An optional 2000-400-02 4-in-1 transducer can be
mounted using a 2000-500-02 adaptor kit. For more
information, refer to Appendix A–Accessories.
C — Transducer Mounting
A transducer facilitates the low-to-high ranges of the wrench
under test. The transducer must be installed into the loader by
lining up the red mark with the "TORQUE" label on the loader
and securing it using two quick release pins.