CDI Torque MULTITEST Motorized Loader - Manual (Page 73)

6-1
2000-800-02 Motorized Loader
The 2000-800-02 Motorized Loader is designed as an integral
component of the CDI Motorized Control Torque Calibration
System, providing a precision output torque of up to 2000 ft lb
while requiring only 10 ft lb input.
Application
The loader is a laboratory grade instrument used for testing and
calibrating all torque wrenches, drivers, torque multipliers, non-
impact pneumatic and electric nut runners.
Optional fixtures can be added for testing and calibrating cable
tensiometers and compression or tension gauges.
Power
The Motorized loader requires AC power, 115VAC 60 Hz,
6.3 amps.
WARNING
Do not use this equipment with the power off.
Always turn on the indicator and loader so the
torque and load values are indicated on the display.
Transducer Rotation
The loader provides up to 20° of transducer rotation in both
clockwise (CW) and counter clockwise (CCW) directions.
Motorized Control Loader System
Components included in the Motorized System are:
• 2000-810-01 Indicator,
• Motor
• 2000-800-02 Loader, and • Power Amplifier Box
• 2000-100-02 Roll Cabinet. • Motorized Control Box
When the 2000-800-02 Motorized Loader interfaces with the
2000-810-01 Torque/Force Indicator and the MULTITEST series
of torque transducers, the Motorized Control Loader system
provides precision loading, monitoring and data acquisition of
torque, force and angle parameters within 0.25% accuracy.
System capabilities include, data storage, retrieval, statistical
analysis and automatic downloading to a printer or computer.