Climadiff DVA180/305G - Manual (Page 63)

63
CONNECTION TO THE ELECTRICAL POWER NETWORK
Be sure to read and understand the safety instructions indicated at the beginning
of this guide.
If the wine cabinet was tilted very much during its transport or placement, it
is important to leave the wine cellar in the vertical position for 24 hours
before connecting it so that the lubricating oil can descend and accumulate
in the compressor.
Otherwise, the cooling system could completely break down.
Refer to the safety instructions mentioned at the beginning of this guide !
Your wine cellar is equipped with a connecting cable and a power plug for a
230 V/50 Hz single phase power network (CE standard). It must be
connected to an earthed wall outlet with a minimum protection of 10 A.