Climadiff DVA180/305G - Manual (Page 70)

70
TEMPERATURE SELECTION
If a new setting or an adaptation of the preservation temperature is
considered to be necessary:
•
Press the SET key « » during 3 seconds to enter into the main menu.
•
The possible settings are: temperature setting, winter system temperature
setting, high temperature alarm setting.
•
The different possible settings will be automatically displayed after some
seconds in a sequential mode, or you can select one by pressing
successively the SET key “ » until the selected function.
•
According to your model the below screen is displayed :
•
Press the UP and DOWN keys « » to select the temperature
requested, and press the SET key “ » to validate your choice, or wait a
few secondes and you will be back into the main menu. When the setting is
selected, the temperature is in a blinking mode, and then you can adjust it.
To decrease the temperature :
•
Press the DOWN key “ » to decrease the temperature degree to
degree.
•
Validate your selection by pressing the SET key « »
To increase the temperature :
•
Press the UP key « » to increase the temperature degree to
degree.
•
Validate your selection by pressing the SET key « »