Detex V40 EHxR - Manual (Page 2)

frame engages at Minimum door stile 2" (51mm)
RHR Door
Inside Face
CL
Floor
Finished
40"
RHR Door
Reference
Stop Face
Horizontal
LHR Door
Inside Face
LHR Door
Face
Door Must Not Bind
NOTE: 750mm MAXIMUM DOOR WIDTH OPENING FOR EUROPE FOR 36" DEVICE
(1000mm MAXIMUM DOOR WIDTH OPENING FOR EUROPE FOR 48" DEVICE)
THE SAFETY FEATURES OF THIS PRODUCT ARE ESSENTIAL TO ITS COMPLIANCE WITH EN 1125.
NO MODIFICATION OF ANY KIND, OTHER THAN THOSE DESCRIBED IN THESE INSTRUCTIONS ARE PERMITTED.
X
Door Must Swing Freely Door Must Not be Warped
Surface strike possible
Mortise strike recommended
least (3) screw
threads.
Door Must Not Sag
X
Door Skin
X
Blind Rivet Nut
X
Doors and frames with walls having a structural thickness (metal skin
plus reinforcement, or solid wood) to engage less than (3) full
screw threads, are considered unreinforced for hardware.
!!!CHECK BEFORE STARTING!!!
Unreinforced Doors: Use Sex Nuts and Bolts
Fasteners for unreinforced openings are not supplied by Detex.
Unreinforced Frames: Use Blind Rivet Nuts (see sketch)
Minimum door stile 4-1/2" (114 mm)
Wide Stile (Surface Strike)
Template drawings provide door and frame
door and frame preparation.
structural and dimensional specifications for
Narrow Stile
Reinforced door or
Reinforcement
101275 Page 2