Environmental Water Systems TT 1054 TWIN TANK - Manual (Page 7)

www.EWSWATER.com
EWS, Inc. / Environmental Water Systems 4.3-7
Begin the Regeneration Cycle Steps
as follows for Start-Up
· Push and Hold Extra Cycle Button for approxi-
mately 5 seconds to advance the valve into regen-
eration and to the Tank Fill Address.
• Tank Fill Display [ 1 - - - - 5.0 ]
Allow the Tank Fill to complete the Cycle and Con-
firm the water is being delivered into the Empty Brine
Tank. Allow the valve to advance to the next cycle with-
out assistance.
NOTE: While waiting for the Cycle to complete check
for leaks at Plumbing connections and Factory con-
nections which have been loosened during Shipping
and Handling.
1 - - - - 5.0
2 - - - 15.0
· Brine Making Display [ 2 - - - 15.0 ]
Once the valve has Advanced into the Brine Making
Cycle wait until the number (2) stops flashing.
Push the Extra Cycle Button Once to advance Valve
to the next cycle.