ETS-Lindgren 95252-1 Bulk Current Injection Probes (Archived) - Manual (Page 7)

BULK CURRENT INJECTION PROBES Application
© ETS-Lindgren, L.P. – February 2005 3
Rev C – PN 399263
Entire cables or cable bundles may be tested, or each line may be
broken out and tested individually. Some standards may also
require simultaneous injection onto multiple cable bundles using
several injection probes. Absorbing clamps may be required to
isolate peripheral equipment from the IUT, and insure that only the
IUT is exposed to the required stress level. Refer to the pertinent
test standard for more specific details.
Archived 6/1/10