Hybrid Racing HR EG DC Kswap Mount Kit - Manual (Page 2)

2
Install Guide
STEP 1: Remove OEM engine
and all of your OEM engine
mounts. While the engine is out it
is a good time to give the bay a
good pressure washing. Once
the cleaning is done go ahead
and move to step 2.
STEP 2: On the passenger side
(US SPEC) there is a bracket
welded onto the frame rail. Using
a 25/64” or larger drill bit drill out
all of the spot welds and remove
the bracket.
STEP 3: On the passenger side
under the frame rail drill out and
remove alignment tab for the
front transmission mount. You
should have two spot welds.
Once the bracket is removed use
a grinding wheel to clean up all of
the spots where you drilled for
steps 2 and 3.
STEP STEP STEP 3 3 3
STEP 2
STEP STEP STEP 1 1 1
STEP STEP STEP 2 2 2