Hybrid Racing HR EG DC Kswap Mount Kit User Manual
Page 3
3
STEP 6 Once you have the
bracket secure move to the top
side mark the holes, remove the
bracket and using a ½ drill bit drill
two holes that line up with the
nuts on the bottom of the frame
rail. If you selected OPTION Z
drill through these holes into the
frame rail from the top. If you se-
lected OPTION X drill through
these holes into the frame rail
from the top.
STEP 5 :
OPTION Z: If you are running
level 0 or OEM axles install it just
like it is shown in the image to
the left.
OPTION X: If you are running
power steering or level 2 or high-
er axles slide the bracket so that
the holes labeled X line up with
the nuts in the frame rail.
Install Guide
STEP
STEP
STEP
6
6
6
STEP
STEP
STEP
5
5
5
STEP
STEP
STEP
4
4
4
STEP 4: Slide the HR bracket
onto the passenger side frame
rail and secure it from the bottom
using one of the options in STEP
5.
Z X Z X