Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 141)

Procedure and general information
Authorizing a mobile phone (connecting)
Before using your mobile phone with
COMAND for the first time, you will need to
search for the phone (
Y
page 139) and then
authorize it (
Y
page 140). Depending on the
mobile phone, authorization either takes
place by means of Secure Simple Pairing or by
entering a passkey. COMAND automatically
enables the procedure suited to your mobile
phone. You can recognize Secure Simple Pair-
ing by a code which is displayed in COMAND
and on the mobile phone. You can recognize
the passkey system by the fact that you have
to enter a code on the mobile phone and in
COMAND. The mobile phone is always con-
nected automatically after authorization.
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. You can also
start the search procedure and authorization
on the mobile phone (
Y
page 141).
Device-specific information on authorizing
and connecting Bluetooth ® -capable mobile
phones can be obtained from your authorized
Mercedes-Benz Center or via the Internet at
http://www.mercedes-benz.com/
connect.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time.
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of COMAND or
deactivate Bluetooth ® on your mobile phone.
If you no longer want the Bluetooth ® connec-
tion to be established automatically, the
mobile phone must be de-authorized (discon-
nected) (
Y
page 142).
Searching for a mobile phone
X
To call up the telephone menu: press the
% button.
X To switch to the menu bar: slide 6 the
controller.
X To select Connect Device Connect Device : turn the con-
troller and press to confirm.
The device list is displayed.
X To select Search for Phones Search for Phones : turn and
press the controller.
A message is displayed that Bluetooth ®
must be activated on the mobile phone and
must be made visible to other devices.
X To select Start Search Start Search : press the con-
troller.
The available mobile phones are displayed
in the device list.
The duration of the search depends on the
number of Bluetooth ® telephones within
range and their characteristics.
If a new phone is found, it appears in the
device list with the Ï symbol. You can now
authorize (connect) the mobile phone found
(
Y
page 140).
If the device list is already full, you will be
requested to de-authorize a mobile phone
(
Y
page 142).
When you call up the device list again, de-
authorized devices will be removed from the
list. To update the device list, start the search
again.
Connecting/disconnecting a mobile phone
139
Telephone
Z