Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 31)

The menu called up on the driver's side is
shown.
If COMAND is switched off by removing the
key from the ignition lock while SPLITVIEW is
activated and then switched on again within
30 minutes, SPLITVIEW is activated with the
last settings.
If COMAND is switched on again after more
than 30 minutes, SPLITVIEW is not activated.
If SPLITVIEW is activated on the front-
passenger side, the settings from the driver's
side will be used.
From media mode
SPLITVIEW can be switched on from any
media mode.
Activating
X
From any media mode, e.g. Media Inter-
face: slide 6 the controller.
The menu bar is shown.
X To select Options Options : turn and press the con-
troller.
A menu appears.
X Select Start Application at Other Start Application at Other
Seat Seat .
A menu appears.
X
Select SplitView SplitView .
A window with the Starting Starting Source Source in in
SplitView… SplitView… message appears.
SPLITVIEW switches on. The ù symbol
appears in the status bar.
Deactivating
X From the driver's side, use the Ø button
(
Y
page 28).
X
From the front-passenger side, use the
COMAND remote control.
Additional options
X To select Additional Options… Additional Options… in the
menu: turn and press the controller.
A menu appears.
X
To switch SPLITVIEW on/off: proceed as
described under "Switching the rear-com-
partment displays on/off" (
Y
page 72).
Instead of selecting a rear-compartment
display, select SplitView SplitView .
X To lock/unlock SPLITVIEW: proceed as
described under "Locking/unlocking the
rear-compartment displays" (
Y
page 72).
Instead of selecting a rear-compartment
display, select SplitView SplitView .
Transferring a destination to the
driver
Using SPLITVIEW you can select a destination
from the front-passenger side and transfer
this to the driver's side.
X Switch on SPLITVIEW (
Y
page 28).
X
To select ICON_SplitView ICON_SplitView On On in the menu
bar: turn and press the controller.
The SPLITVIEW symbol appears in the dis-
play and the ù display switches to Off Off .
X
Select ® in the main function bar with the
COMAND remote control.
A menu appears.
X
Using the COMAND remote control, select
Mercedes-Benz Apps Mercedes-Benz Apps .
You see the selection of Mercedes-Benz
Apps.
X
Select Google Local Search Google Local Search with the
COMAND remote control (
Y
page 179).
A menu appears.
X
Select a search position, e.g. In the In the
Vicinity of the Destination Vicinity of the Destination .
A menu appears.
SPLITVIEW
29
At
a
glance