Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 46)

Your COMAND equipment
These operating instructions describe all
standard and optional equipment available
for your COMAND system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your COMAND system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your COMAND system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press the Ø button.
The vehicle menu is displayed.
X To select System Settings System Settings : slide V¬,
turn and press the controller.
A menu appears.
X To select Display Display : turn and press the con-
troller.
A menu appears.
X Select Brightness Brightness .
A control appears.
X
Select the desired brightness.
i The display brightness can be adjusted
individually for the two COMAND displays
at night using the controller.
Display design
The COMAND display features optimized
designs for operation during daytime and
night-time hours. You can set the design by
manually selecting day or night design or opt
for an automatic setting.
X
Press the Ø button.
The vehicle menu is displayed.
X To select System Settings System Settings : slide V¬,
turn and press the controller.
A menu appears.
X To select Display Display : turn and press the con-
troller.
A menu appears.
X Select Day Mode Day Mode , Night Mode Night Mode or Auto Auto .
The # dot indicates the current setting.
Design Explanation
Day Mode Day Mode The display is set perma-
nently to day design.
Night Mode Night Mode The display is set perma-
nently to night design.
Auto Auto If the Auto Auto setting is
selected, COMAND eval-
uates the readings from
the automatic vehicle
light sensor and auto-
matically switches
between the display
designs.
44
Display settings
Sy
ste
m
se
ttin
gs