Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 65)

X Call up Vehicle Settings Vehicle Settings (
Y
page 58).
X
To select Interior Motion Sensor Interior Motion Sensor : turn
and press the controller.
The function switches on or off, depending
on the previous setting.
Activating/deactivating the trunk lid
opening height restriction
Activating the Trunk Opening-height Trunk Opening-height
Restriction Restriction function allows you to avoid
bumping the trunk lid on a low garage ceiling,
for example.
X Call up Vehicle Settings Vehicle Settings (
Y
page 58).
X
To select Trunk Opening-height Trunk Opening-height
Restriction Restriction : turn and press the control-
ler.
The function switches on or off, depending
on the previous setting.
Seats
Overview
Using the T button next to the controller
or the seat settings menu item in the vehicle
menu, you can call up the following adjust-
ment functions:
R Backrest side bolsters
R Lumbar
R Shoulder area
R
Massage
R
Dynamics
R Seat heating balance
i You also can save and call up the current
settings of a seat function using the mem-
ory button and the corresponding memory
position switch (see the vehicle Operator's
Manual).
Selecting the adjustment function
and seat
X Press the T button.
The seat settings menu is shown.
or
X
To select Vehicle Vehicle from the main function
bar: turn and press the controller.
X To select Seat Seat Settings Settings in the menu: turn
and press the controller.
The menu for selecting seat functions is
activated.
X To select the required seat function: turn
and press the controller.
X
To switch between Driver Driver and Front Front
Passenger Passenger : slide XVY the controller.
Seats
63
Veh
icle
fu
nct
ions