Sound, Sound settings – Mercedes-Benz S-Sedan 2015 COMAND Manual User Manual
Page 253
X
To return to the menu: slide ZV the con-
troller.
X
To return to the basic menu: press the %
button briefly.
Adjusting the balance/fader
Balance moves the focus of the sound
between left and right.
Fader moves the focus of the sound between
front and rear.
X
To display the menu bars: slide VÆ the
controller in media mode.
X
Turn the controller until
Balance/Fader
Balance/Fader
is
brought to the front.
X
To activate rotary menus for balance and
fader: slide VÆ the controller.
X
To switch between the rotary menus: slide
XVY the controller.
X
To set the desired
Balance/Fader
Balance/Fader
setting:
turn the controller.
Rotary menus and the image show the
sound focus set.
X
To return to the menu: slide ZV the con-
troller.
X
To return to the basic menu: press the %
button briefly.
Changing loudspeaker source
Select
Select Sound
Sound Source
Source
specifies which seat-
based media source shall be output on the
speaker system.
Example: a media source is being listened to
using headphones in the left-hand rear seat.
Rear Left
Rear Left
must be selected in
Select
Select
Sound
Sound Source
Source
if the same media source is to
be listened to using the sound system.
i
If the loudspeaker source is set to a seat
where no playback is activated, nothing can
be heard on the vehicle loudspeaker.
X
To display the menu bars: slide VÆ the
controller in media mode.
X
To select
Sound
Sound
in the menu bar: turn and
press the controller.
The menu with the last accessed setting
appears.
X
Turn the controller until
Select Sound
Select Sound
Source
Source
is in the center.
X
To activate the rotary menu for the speaker
source: slide V Æ the controller.
X
To set the desired speaker source: turn the
controller.
The segment, text and image show the
selected setting.
X
To return to the menu: slide ZV the con-
troller.
X
To return to the basic menu: press the %
button briefly.
Sound settings
251
Sound