Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 277)

Example: track 2
X Press number button 2.
Example: track 12
X Press the corresponding number keys in
rapid succession.
X
Wait for approximately three seconds after
making the entry.
You will hear the track which has been
entered. The corresponding basic menu
then reappears.
i It is not possible to enter numbers that
exceed the number of tracks on the CD or in
the currently active folder.
Fast forwarding/rewinding
X With the display/selection window active,
press the = or ; button on the
remote control repeatedly until you reach
the desired position.
or
X
Press and hold the E or F button
until the desired position is reached.
Selecting a folder
This function is only available in MP3 mode.
X
Select Search Search using the :=;
buttons on the remote control and press
the 9 button to confirm.
X
Select Folder Folder using the :=;
buttons and press the 9 button to confirm.
The folder content appears.
X To switch to the next folder up: press the
= button on the remote control.
The display shows the next folder up.
X
Select the folder with the 9: but-
tons and press the 9 button to confirm.
You will see the tracks in the folder.
X
Select the track using the 9: but-
tons and press the 9 button to confirm.
The track is played and the corresponding
folder is now the active folder.
Pause/Playback
X To pause playback: press the ; /
Ë button on the remote control.
The Ë display changes to Ì.
X
To continue playback: press the ; /
Ë button.
The Ì display changes to Ë.
Playback options
X Select Options Options using the :=;
buttons and press the 9 button to confirm.
X
The options list appears. The # dot indi-
cates the option currently selected.
X Select Normal Normal Track Track Sequence Sequence , Random Random
Tracks Tracks or Random Folder Random Folder using the
9: buttons and press the 9 button
to confirm.
The option is switched on. For all options
except Normal Track Sequence Normal Track Sequence , you will
see a corresponding display in the display/
selection window.
i If you switch the data carrier which you
are currently listening to, the Normal Normal
Track Sequence Track Sequence option is activated auto-
matically. If an option is selected, it
remains selected after the system is
switched on or off.
Switching track information on/off
If the function is switched on, the information
saved in the audio files, such as track, artist or
album, will be shown (if available).
If the function is switched off, the names of
the files and folders on the disc are shown.
X Select Options Options using the :=;
buttons and press the 9 button to confirm.
X
Select Show Track Information Show Track Information using
the 9: buttons and press the 9
button to confirm.
The function is switched on O or off ª,
depending on the previous status.
Audio/video mode
275
Rea
rSe
at
En
tertai
nme
nt
Sys
tem
Z