Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 51)

Activating WiFi
X
To select Vehicle Vehicle from the main function
bar: turn and press the controller.
X To switch to the menu bar: slide V¬ the
controller.
X
Select System Settings System Settings .
The system settings menu is shown.
X Select WiFi WiFi .
The WiFi menu appears.
X
Select Activate Activate .
X Press the controller.
Switch the connection on O or off ª,
depending on the previous setting.
Connecting the device
General notes
i The exact WiFi connection procedure may
vary depending on the device to be con-
nected. Follow the instructions that are
shown in the display. Further information
can be found on the operating instructions
for the device you wish to connect.
Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
X To select Vehicle Vehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide V¬ the
controller.
X Select System Settings System Settings .
The system settings menu is shown.
X
Select WiFi WiFi .
The WiFi menu appears.
X Select Connect Via WPS PIN Connect Via WPS PIN .
X Select the vehicle from the device to be
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID MB MB
WLAN XXXXX WLAN XXXXX .
The device to be connected generates a
PIN.
X This PIN is also entered on COMAND.
Connecting the device by pressing a
button (push button)
WiFi
49
Sys
tem
set
tings