Mercedes-Benz S-Sedan 2015 COMAND Manual - Manual (Page 274)

Radio mode
X
To switch on: press the $ button on
the remote control.
Radio mode starts.
Further information on radio mode
(
Y
page 198).
Media mode
Activating media mode
There are several ways to activate media
sources using COMAND.
The relevant sections of the Operator's Man-
ual describe the simplest way to activate a
media source.
This section describes all options for activat-
ing media sources.
Using the MEDIA button
X
Press the Õ button on the remote
control.
The menu for the last accessed media
source appears.
X
To select the media source: keep press-
ing the Õ button on the remote control
until the required media source has been
set.
If playable music files are found, they will be
played by COMAND.
Switching on automatically
If COMAND is only active at one operating
position in the rear compartment, the respec-
tive medium will switch on automatically once
connected/inserted.
If a media function is already switched on in
COMAND, this will be interrupted and the
basic display of the newly connected/
inserted medium will appear.
If COMAND is being operated in another func-
tion, such as navigation, when an external
media source is connected/inserted, the
basic display will not change. Only the music
from the newly connected data carrier will
play.
Starting media playback using the
main function bar
X
To show the menu: press the 9 button
on the remote control.
X Select Media Media using the =; buttons
on the remote control and press the 9
button to confirm.
X To select the media source: turn the selec-
tor wheel on the remote control.
or
X
Press the =; buttons on the remote
control.
The menu appears with the available media
sources.
X
Press button 9 on the remote control.
If the disc contains music or video files,
these will be played. The corresponding
basic menu will be shown.
272
Media mode
Rear
Se
at
En
tertain
men
tSys
tem