Mercedes-Benz SLS-Class 2015 Owners Manual - Manual (Page 158)

When telephoning, you must observe the
legal requirements for the country in which
you are currently driving.
Functions and displays are dependent on the
optional equipment installed in your vehicle.
You can establish a Bluetooth
® connection to
COMAND (see the separate operating
instructions).
X Switch on the mobile phone and COMAND.
X Press the = or ; button on the steer-
ing wheel to select the Tel Tel menu.
You will see one of the following display mes-
sages in the multifunction display:
R Please Please Enter Enter PIN PIN : the mobile phone has
been placed in the mobile phone bracket
and the PIN has not been entered.
X
Enter the PIN using the mobile phone,
Voice Control System or COMAND.
The mobile phone will search for a network.
In the meantime, the Phone No Service Phone No Service
display message appears in the multifunc-
tion display.
R Phone Ready Phone Ready or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R Phone No Service Phone No Service : there is no network
available or the mobile phone is searching
for a network.
Accepting a call
If someone calls you when you are in the Tel Tel
menu, a display message appears in the mul-
tifunction display, for example:
X Press the 6 button on the steering
wheel to accept an incoming call.
You can accept a call even if you are not in the
Tel Tel menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the Tel Tel menu.
Dialing an entry from the phone book
If your mobile phone is able to receive calls,
you can search for and dial a number from the
phone book in COMAND at any time.
X
Copy the phone book from the mobile
phone to COMAND.
X Press the = or ; button on the steer-
ing wheel to select the Tel Tel menu.
X
Press the 9, : or a button to
switch to the phone book.
X Press the 9 or : button to select the
name you want.
To scroll rapidly, press and hold the 9
or : button for longer than one second.
After a short time, the rapid scroll speeds
up.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X Press the 9 or : button to select the
phone number you want.
X
Press the 6 or a button to start dial-
ing.
or
X If you do not want to make a call: press
the ~ button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
156
Menus and submenus
On-boar
dc
omputer
and
displa
ys