Mercedes-Benz SLS-Class 2015 Owners Manual - Manual (Page 238)

X Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X Take the TIREFIT kit out of the trunk
(
Y
page 234).
X Open the TIREFIT kit and remove "max.
80 km/h" sticker D.
X
Affix sticker D within the driver's field of
vision.
i If TIREFIT leaks out, allow it to dry. It can
then be removed like a layer of film.
If you get TIREFIT on your clothing, have it
cleaned as soon as possible with perchloro-
ethylene.
Comply with the manufacturer's safety
instructions on the tire inflation compressor
label and on the tire sealant bottle.
i You will also find operating instructions
= in the lid of the TIREFIT kit.
X
Pull the cable and filler hose E out of the
housing.
X
Unscrew flanged cap A.
X Unscrew the cap from tire sealant bot-
tle :. Make sure that the aluminum film is
not damaged when doing so.
X
Screw tire sealant bottle : clockwise
tightly onto flange seal F.
This pierces the aluminum film.
X Remove the cap from the valve on the faulty
tire.
X
Make sure that pressure release screw C
is closed.
X Remove the dust protection cap from filler
hose E.
X
Screw the end of filler hose E onto tire
valve G.
X
Make sure that on/off switch ; on the tire
inflation compressor is set to 0.
X Insert connector ? into the 12 V socket
(
Y
page 203).
X
Select key position 2 with the Start/Stop
button (
Y
page 119).
i The battery discharges during tire infla-
tion compressor usage. For this reason,
236
Flat tire
Break
dow
na
ss
is
tanc
e