Mercedes-Benz SLS-Class 2015 Owners Manual - Manual (Page 160)

X Press the : or 9 button to select the
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer: func-
tion.
You will see the selected setting: km km or
miles miles .
X Press the a button to save the setting.
Permanent display for outside tempera-
ture or additional speedometer
The
Permanent Display: Outside Tem‐ Permanent Display: Outside Tem‐
perature/Speedometer perature/Speedometer allows you to
choose whether the multifunction display
shows the outside temperature or the speed
at the bottom right. The unit used in the addi-
tional speedometer depends on the display
unit set (
Y
page 157).
X Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X
Press the : or 9 button to select the
Inst. cluster Inst. cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display Permanent Display function.
You will see the selected setting Speedom‐ Speedom‐
eter [km/h] eter [km/h] or Speedometer [mph] Speedometer [mph] or
Outside Temperature Outside Temperature .
X
Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
Lights: Lights: function
and the light switch is in the à position,
the daytime running lamps are switched on
automatically when the engine is running. If it
is dark, the low-beam headlamps switch on
automatically.
In the dark, the following also light up:
R the low-beam headlamps
R the standing lamps
R the tail lamps
R
the license plate lamp
R
the side marker lamps
X Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X
Press the : or 9 button to select the
LIGHTS LIGHTS submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Lights: Lights: function.
You will see the selected setting: Enabled Enabled
or Disabled Disabled .
X Press the a button to save the setting.
Setting the brightness for the display and
switches
You can use the
Brightness Display/ Brightness Display/
Switches: Switches: function to set the brightness of
the multifunction display and the switches in
the vehicle.
X
Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X Press the : or 9 button to select the
LIGHTS LIGHTS submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches: Brightness Display/Switches: func-
tion.
You see the selected setting Level Level with a
value of between 0 and 100.
X
Press the a button to save the setting.
X
Press the : or 9 button to increase
or decrease the brightness.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
The
Locator Locator Lighting: Lighting: function allows you
to set whether the exterior lighting should
come on when it is dark:
R for 40 seconds after unlocking the vehicle
with the key.
The exterior lighting switches off if you
open the driver’s door.
R for 15 seconds after switching off the
engine and closing the doors.
If the engine is switched off and no doors
are opened, or if an open door is not closed,
158
Menus and submenus
On-board
comput
er
and
display
s