Mercedes-Benz CL-Class 2011 - Manual (Page 281)

The shift range selected is shown in the
multifunction display. The automatic
transmission shifts only as far as the selected
gear.
Driving situations
= You can use the engine's braking
effect.
5 To use the braking effect of the
engine on downhill gradients and
for driving:
R on steep mountain roads
R in mountainous terrain
R
in arduous conditions
4 To use the braking effect of the
engine on extremely steep downhill
gradients and on long downhill
stretches
Restricting the shift range
X Pull the left-hand steering wheel paddle
shifter.
The shift range is restricted.
i In order to prevent the engine from
overrevving, the automatic transmission
does not shift down when the engine speed
is too high.
i If the maximum engine speed for the shift
range is reached and you continue to
accelerate, the automatic transmission
shifts up in order to prevent the engine
from overrevving, even if the shift range is
restricted.
Derestricting the shift range
X Pull the right-hand steering wheel paddle
shifter.
The shift range is derestricted.
Clearing the shift range restriction
X Pull and hold the right-hand steering wheel
paddle shifter until
D is shown again in the
multifunction display.
The automatic transmission shifts from the
current shift range directly to
D.
Selecting the ideal shift range
X Pull the left-hand steering wheel paddle
shifter and hold it in position.
The automatic transmission shifts to the
gear which allows ideal acceleration and
deceleration. To do this, the automatic
transmission shifts down one or more
gears.
Manual drive program
Switching on the manual drive program
The manual drive program is only available for
AMG vehicles.
Manual drive program
M is different from
drive program S with regard to spontaneity,
responsiveness and smoothness of gear
changes.
Manual drive program
M can be selected
using the program selector button. You can
change gear using the steering wheel paddle
shifters in manual drive program
M if the
transmission is in position D. The gear
currently selected and engaged is shown in
the multifunction display.
X Press program selector button
(
Y page 277) repeatedly until M appears in
the multifunction display.
Upshifting
!
In manual drive program M, the automatic
transmission does not shift up
automatically even when the engine
limiting speed for the current gear is
reached. When the engine limiting speed is
reached, the fuel supply is cut to prevent
Automatic transmission
279
Driving and parking
Z