Towing the vehicle with the rear axle raised, Towing vehicles with both axles on the ground, Roadside assistance – Mercedes-Benz CL-Class 2011 User Manual

Page 434: Towing and tow-starting

Advertising
background image

X

Press the mark on cover : inwards, in the
direction of the arrow.

X

Take cover : off the opening.

X

Screw the towing eye in clockwise to the
stop and tighten it.

Removing the towing eye

X

Loosen the towing eye and unscrew it.

X

Attach cover : to the bumper and press
until it engages.

X

Place the towing eye in the vehicle tool kit.

Towing the vehicle with the rear axle

raised

Only possible for vehicles without

4MATIC.
When having your vehicle towed with the rear
axle raised, observe the important safety
notes (

Y

page 430).

!

The ignition must be switched off if you

are towing the vehicle with the rear axle
raised. Intervention by ESP

®

could

otherwise damage the brake system.

X

Switch on the hazard warning flashers
(

Y

page 248).

X

Turn the SmartKey to position

0 in the

ignition lock and remove the SmartKey.

X

When leaving the vehicle, take the
SmartKey or the KEYLESS-GO key with you.

Towing vehicles with both axles on

the ground

When having your vehicle towed, observe the
important safety notes (

Y

page 430).

G

Warning

With the engine not running, there is no power
assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle. Adapt your driving accordingly.

The automatic transmission automatically
shifts to position

P when you open the driver's

or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position

N when towing, do the

following:

X

Make sure that the vehicle is stationary and
that the SmartKey is in position

0 in the

ignition lock.

X

Turn the SmartKey to position

2 in the

ignition lock.
On vehicles with KEYLESS-GO, use the
SmartKey instead of the Start/Stop button
(

Y

page 267).

X

Depress and hold the brake pedal.

X

Shift the automatic transmission to
position

N.

X

Release the brake pedal.

X

Release the electric parking brake.

X

Switch on the hazard warning flashers
(

Y

page 248).

X

Leave the SmartKey inserted in the ignition
lock in position

2.

432

Towing and tow-starting

Roadside Assistance

Advertising